0571-63402368
CN Search
TGHG Compression blower heat zero gas consumption drier Product introduction
blower heat zero gas consumption drier is an energy-saving compressed air drying device. It consists of two alternating absorbers, an electric heater, a blower, a back cooler, a switching valve and a control system。When the compressed air passes through the fixed adsorption bed of the adsorbed, the moisture is separated from the wet air. When the adsorbent works for a certain period of time, the adsorption reaches saturation equilibrium. The air blown by the blower regenerates the adsorbent after being heated by the electric heater, and the adsorbent's adsorption capacity is restored. The used for blowing and cooling, so that the dryer with blast heat and zero gas consumption can run safely and reliably for a long time.
  • Main Characteristics

  • Technical Indicators

Working principle:

blower heat zero gas consumption drier is an energy-saving compressed air drying device. It consists of two alternating absorbers, an electric heater, a blower, a back cooler, a switching valve and a control system。When the compressed air passes through the fixed adsorption bed of the adsorbed, the moisture is separated from the wet air. When the adsorbent works for a certain period of time, the adsorption reaches saturation equilibrium. The air blown by the blower regenerates the adsorbent after being heated by the electric heater, and the adsorbent's adsorption capacity is restored. The used for blowing and cooling, so that the dryer with blast heat and zero gas consumption can run safely and reliably for a long time.

blower heat zero gas consumption drier is an energy-saving compressed air drying device. It consists of two alternating absorbers, an electric heater, a blower, a back cooler, a switching valve and a control system。When the compressed air passes through the fixed adsorption bed of the adsorbed, the moisture is separated from the wet air. When the adsorbent works for a certain period of time, the adsorption reaches saturation equilibrium. The air blown by the blower regenerates the adsorbent after being heated by the electric heater, and the adsorbent's adsorption capacity is restored. The used for blowing and cooling, so that the dryer with blast heat and zero gas consumption can run safely and reliably for a long time.

Working pressure:0.7~1.0MPa

Inlet temperature:≤40℃

Ambient temperature:≤45℃

Dew point:≤-40℃

Air  consumption:0%

Inlet oil content:0.01ppm(w)

Power:380V/1PH/50Hz

Adsorbents:Activated alumina+ molecular sieve

Switching time:5h

1-9218d17b-cc59-4023-94a9-c9a0418db080.png

895--------m.onscc.cn

79--------m.akvd.cn

917--------m.whldls.cn

157--------m.wgbxj.cn

355--------m.wohs.cn

969--------m.zhuyc.cn

177--------m.dlsjk.cn

271--------m.egqs.cn

600--------m.snphr.cn

289--------m.pengzi.com.cn